STATUS: IN STOCK
|The RTS2 is a proven competitor, winning the IPSC World Championship, USPSA National Championship, and many more state, local, and international competitions. The large heads up display provides an unobstructed sight picture in which the red dot hovers on the sight line, illuminating the point of impact on the target, creating the fastest target acquisition in existence, and unlimited eye relief. Similarly it uses a beam-splitter lens made of glass; hard coated for maximum scratch resistance, and light transmission, while the parallax free design enables targets to be acquired without the need to center the dot in the lens.
The RTS2 uses a CR2032, lithium battery that is contained within a removable battery tray which permits battery replacement without dismounting the sight; this eliminates the need for re-zeroing when replacing a battery. The battery tray is O-ring sealed, and is part of the waterproofing that goes into every RTS2. A 10 position manually operated push button switch provides precision intensity adjustment, previous intensity return, and auto off after 4 hours of inactivity (No Button Presses).
The new V5 Hardened Electronics provide increased reliability as well as a new MSS Motion Sensing System (Shake to Wake) that will power down the dot to standby mode to save battery life when no motion or vibration is detected for 3 minutes. The dot will power on immediately when motion or vibration has been detected.
The RTS2 aircraft alloy housing and electronics are designed to handle the hottest loads from large caliber firearms. The RTS2 provides 1 moa click adjustments for windage and elevation resulting in pin point accuracy. A positive locking screw for both windage and elevation lock the adjustment screws in position.
RTS2B model includes direct mounting screws (8-32x1/2) but does not include a mount. The sight can be installed using a C-MORE mounting kit, an aftermarket or custom mount, or directly to the firearm, with the correct mounting interface machined into the slide or barrel depending on the firearm, or an OEM plate system designed for this sight.
Complete warranty terms and conditions can be found here - WARRANTY
|Instruction Manual||Download PDF|
|There are five RTS2B models to choose from, the differences being the size of the dot. These sights are available in Black only with a 3, 6, 8, 10 or 12 MOA dot. The dot size cannot be changed via plug in modules like the standard C-MORE sights.
Sights are shipped with the following components:
1 RTS2 Sight, 1 Protective Sight Cover, 1 CR2032 Battery (Installed), 1 Sight Adjustment Wrench, 2 Rail Mount Wrenches, 2 Direct Mounting Screws w /Wrench, 1 Instruction Manual.
|V5 Hardened Elecronics with MSS Motion Sensing System (Shake to Wake)||10 position manually operated push button intensity buttons with previous intensity return, auto off (after 4 hours), and a low battery indicator.|
|Aluminum Body Construction for Maximum Durability|
|Precision 1moa Click Adjustments With Lock|
|C-MORE Style Large Rounded Glass Lens
(wider field of view)
|Anodized in Black|
|Removable Battery Tray
(No Rezeroing Required)
|Water Resistant to 1 meter|
Ultra Bright Red Dot available in 3, 6, 8, 10, or
|Removable Picatinny / Weaver Rail Mount for Direct Mounting (RTS2R)|
|Length||2.007 in. (50.98 mm)|
|Width||1.100 in. (27.94 mm)|
|Height||1.275 in. (32.38 mm)|
|Weight||1.16 oz. (33 g)|
|Weight (without battery)||1.09 oz. (31 g)|
|Rear Deck Height||.473 in. (12 mm)|
|Sight Window Width||1.014 in. (25.76 mm)|
|Sight Window Height||.8665 in. (22.01 mm)|
|Lens||100 % Parallax Free, Anti-Reflective Coated, Glass|
|Distance - Center of Lens to Mounting Surface||.750 in. (19 mm)|
|1 moa Clicks for windage / elevation||Yes|
|Positive Locking System||Yes|
|Elevation Adjustment Range||180 in. @ 100 yds (457cm @ 100 m)|
|Windage Adjustment Range||120 in. @ 100 yds (305cm @ 100 m)|
|Finish||Matte Black Anodize|
|Intensity Switch, 10 position, Push Buttons||Yes|
|Previous Intensity Return on start up||Yes|
|MSS Motion Sensing System (Shake to Wake) Sleep mode after 3 min||Yes|
|Auto Off - After 4 hours of inactivity (No Button Presses)||Yes|
|Dot Sizes Available||3, 6, 8, 10, or 12 moa|
|Battery - 3V Lithium, CR2032||Yes|
|Battery Life - (Intensity Dependent)||5000 hours|
|Operating Temperature Range||-13°F to +131°F (-25°C to +55°C)|
|Storage Temperature Range (No Battery)||-40°F to +158°F (-40°C to +70°C)|
|IPX7 Water Resistance Depth||1 m|